How to calibrate Senstroke sensors
To ensure proper use of the sensors, it is essential to calibrate them on a regular basis or when you feel that the accuracy of the sensors is less than optimal.
Calibration helps the sensor to locate itself in space.
To calibrate a sensor, slide it over a drumstick.
Then go to the “sensors” section, and click on the sensor to calibrate.
The calibration screen appears, with two calibrations to perform.
- The first is located on the left side of the calibration screen.
It consists in putting the rod equipped with the sensor to be calibrated on a table and leaving it completely still for a few seconds. An animation indicates the validation of the calibration.
This step allows the sensor to position itself in space. - The second step is to rotate the sensor on itself on the vertical and horizontal axes so that the sensor can see all directions of the room.
A message is then displayed to let you know that the calibration has been completed.
This step ensures that the sensors are more resistant to vibration and shock, so you won’t lose accuracy during longer sessions.
Repeat this operation for all the sensors.
We recommend that you perform these calibrations for all sensors, including those you use on your feet. Place them on a stick for calibration and then reposition them with the straps around the feet.
